Honda Insight 2000 Owner's Manual page 209

Main Menu
11.Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
80 lbf.ft (108N.m, 11 kgf.m)
Do not catch your clothes or
hands on the hooks on the rear
fender when you replace the
wheel.
Table of Contents
12.To install the rear wheel skirt,
place the skirt against the body.
Line up the slots on the skirt with
the tabs in the body, then push the
skirt upward.
Make sure the wheel skirt is
installed correctly.
TAB
SLOT
Changing a Flat Tire
13.Tighten the two stud fasteners.
Align the marks on the stud
fastener with the marks on the
wheel skirt.
It is not recommended to drive your car-
without the wheel skirts.
It will affect the fuel consumption.
Taking Care of the Unexpected
CONTINUED