Main Menu
Replacing Rear Bulbs
1. Open the hatch.
2. Pull the cover back.
3. Loosen the nut holding the rear
light assembly.
Table of Contents
4. Remove the two covers. Remove
the two screws holding the rear
light assembly. Remove the light
assembly.
COVER
5. Determine which bulb, stop/
taillight, back-up light, side marker
light or turn signal is burned out.
Remove the socket lor that bulb
by turning counterclockwise.
6. Pull the bulb straight out of its
socket.
7. Push the new bulb straight into
the socket until it bottoms.
Lights
CONTINUED
Maintenance