Honda Insight 2000 Owner's Manual page 46

Main Menu
Indicator Lights
Seat Belt Reminder Light
This indicator lights when you turn
the ignition switch ON (II). It is a
reminder to you and your passengers
to protect yourselves by fastening
the seat belts. A beeper also sounds
if you have not fastened your seat
belt.
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the light stays on until
you do. Both the light and the beeper
stay off if you fasten your seat belt
before turning on the ignition.
Charging System
Indicator
If this light comes on when the
engine is running, the battery is not
being charged. For complete
information, see page 219
Instruments and Controls
Table of Contents
The engine can be severely damaged
if this light flashes or stays on when
the engine is running. For complete
information, see page 218.
SRS
This indicator lights when you turn
the ignition switch ON (II). If it
comes on at any other time, it
indicates a problem in the
supplemental restraint system. For
complete information, see page 38.
Shift Up/Shift Down Indicators
See page 137.
Auto Idle Stop Indicator
See page 135.
. IMA System Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch ON (II). If it comes
Low Oil Pressure
Indicator
Supplemental Restraint
System Indicator
on at any other time, it indicates a
problem in the Integrated Motor
Assist (IMA) system. Have the
vehicle checked by the dealer as
soon as possible.
Parking Brake
Canada
U.S.
and Brake
BRAKE
System
Indicator
This light has two functions:
1. It lights as a reminder that you
have not released the parking
brake. Driving with the parking
brake applied can damage the
brakes and tires.
2. If it remains lit after you release
the parking brake, or comes on
while driving, it can indicate a
problem in the brake system. For
complete information, see page
221.