Honda Insight 2000 Owner's Manual page 178

Main Menu
To replace the rear wiper blade:
1. Raise the wiper arm off the
windshield.
2. Pull one end of the blade out from
the holder.
Table of Contents
3. Slide the blade out of the holder.
4. Slide the new blade into the holder.
Make sure it is engaged in the slot
along its full length.
Wiper Blades
5. Insert both ends of the blade into
the holder. Make sure they are
secure.
6. Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
7. Lower the wiper arm.
Maintenance