Saturn VUE 2010 Owner's Manual page 39

If the engine still does not start, and
the key appears to be not damaged,
wait about five minutes and try
another ignition key and check the
fuse. See Fuses and Circuit
Breakers on page 10 37. If the
engine still does not start with the
other key, the vehicle needs service.
If the vehicle does start, the first key
may be faulty. See your dealer/
retailer who can service the
®
PASS-Key III+ to have a new key
made. In an emergency, contact
Roadside Assistance. See Roadside
Assistance Program on page 13 6.
It is possible for the PASS-Key
decoder to learn the transponder
value of a new or replacement key.
Up to 10 keys may be programmed
for the vehicle. The following
procedure is for programming
additional keys only. If all the
currently programmed keys are lost
or do not operate, you must see
your dealer/retailer or a locksmith
who can service PASS-Key
have keys made and programmed
to the system.
See your dealer/retailer or a
locksmith who can service
®
PASS-Key III+ to get a new key
blank that is cut exactly as the
ignition key that operates the
system.
To program the new key:
®
III+
1. Verify that the new key has a
stamped on it.
2. Insert the already programmed
key in the ignition and start the
engine. If the engine does not
start, see your dealer/retailer for
service.
Keys, Doors and Windows
3. After the engine has started, turn
the key to LOCK/OFF, and
remove the key.
4. Insert the key to be programmed
®
III+ to
and turn it to the ON/RUN
position within five seconds of
the original key being turned to
the LOCK/OFF position.
The security light turns off once
the key has been programmed.
5. Repeat Steps 1 through 4 if
additional keys are to be
programmed.
If the PASS-Key
1
damaged, see your dealer/retailer
or a locksmith to have a new
key made.
Do not leave the key or device that
disarms or deactivates the theft
deterrent system in the vehicle.
2-11
®
III+ key is lost or