Saturn VUE 2010 Owner's Manual page 187

3. Say the complete phone number
to be stored at once with no
pauses.
If the system recognizes
the number it responds with
OK, Storing and repeats
the phone number.
If the system is unsure it
recognizes the phone
number, it responds with
Store and repeats the
number followed by Please
say yes or no . If the
number is correct, say
Yes . If the number is not
correct, say No . The
system will ask for the
number to be re entered.
4. After the system stores the
phone number, it responds with
Please say the name tag
followed by a tone.
5. Say a name tag for the phone
number. The name tag is
recorded and the system
responds with About to store
<name tag>. Does that
sound OK? .
If the name tag does not
sound correct, say No and
repeat Step 5.
If the name tag sounds
correct, say Yes and the
name tag is stored. After
the number is stored the
system returns to the
main menu.
Using the Digit Store Command
The digit store command allows a
phone number to be stored by
entering the digits individually.
0
1. Press and hold /
two seconds. The system
responds with Ready followed
by a tone.
Infotainment System
2. Say Digit Store . The system
responds with Please say the
first digit to store followed by
a tone.
3. Say the first digit to be stored.
The system will repeat back the
digit it heard followed by a tone.
Continue entering digits until the
number to be stored is complete.
4. After the complete number has
been entered, say Store . The
system responds with Please
for
say the name tag followed by
a tone.
7-21
If an unwanted number is
recognized by the system,
say Clear at any time to
clear the last number.
To hear all of the numbers
recognized by the system,
say Verify at any time and
the system will repeat them.