Cleaning The Rollers - Microtek ArtixScan1200DF User Manual

Cleaning the Rollers

Prolonged used of the ADF may result in accumulation of ink and other residue on
the feeder's rollers, affecting their efficiency. Clean the rollers periodically to
maintain performance.
• Lift the ADF and open the cover of the scan sensor area at the bottom of the
ADF. Then, clean the rollers with a lint-free cloth or a swab moistened with
alcohol or ECO cleaner, as shown in the graphic below.
• Open the ADF cover by lifting the Earlobe Levers on each side of the cover.
Then, clean the rollers with a lint-free cloth or a swab moistened with alcohol
or ECO cleaner, as shown in the graphic below.
Note: Do not attempt to spin or rotate the rollers while cleaning, for it may damage
the drive train mechanism of the ADF.
ArtixScan 1200DF User's Manual 41