Bosch GreenSource SM024 Installation And Maintenance Manual page 17

SM Series Heat Pump
Figure # 51
6. Remove and discard blower collar. (Figure
#52)
If unit is equipped with optional Electric Heat
and Blower re-configuration is required: Electric
Heat components, blower collar, and Electric
Heat associated wiring will need to be removed.
Additionally, overall unit wiring will need to be
reconfigured for single power connection.
Contact Bosch After Sales Department for
guidance.
Figure # 52
SM Series Heat Pump
7. Remove and retain side panel blower opening
2
1
8. Reinstall blower opening cover in the TOP
Vertical configurability | 17
cover by removing (6) phillips head screws.
(Figures #53 and #54)
Figure # 53
FRONT OF THE PANEL VIEW
Figure # 54
panel. (Figure #55)
Figure # 55
6 720 220 406 (2013/1)