Back Panel - Buffalo AirStation WHR-1166D User Manual

Off:
Mode switch is in the "Bridge" position.

Back Panel

1
Mode Switch
This switch changes between router mode and bridge (access point) mode. Auto mode will enable or disable
router functionality automatically.
2
LAN Port
Connect your computer, hub, or other Ethernet devices to these ports. This switching hub supports 10 Mbps and
100 Mbps connections
3
Internet Port
10 Mbps, 100 Mbps, and 1000 Mbps connections are supported.
Note: In bridge mode, the Internet port becomes a regular LAN port that supports also 1000 Mbps, for a total of 5
usable LAN ports.
4
Reset Button
To reset all settings, hold down this button until the power/diag LED turns amber (about 3 seconds). The power
must be on for this to work.
5
DC Connector
Connect the included AC adapter here.
9