Quick Setup Guide - AirStation Turbo G WHR-HP-G54 High Power Wireless Smart Router www.buffalotech.com Package Contents • WHR-HP-G54 AirStation • Antenna • Base • AC Adapter and Power Cable • CAT5 LAN cable • Utility CD with Manual • Quick Setup Guide •...
. Screw the antenna into the top of your AirStation. It will usually work best if configured to point straight up. Attach the stand if desired. . Make sure that all equipment is powered off, including the AirStation, PCs, and your cable or DSL modem.
Next, you need to configure your router. This is done from a web browser on a computer connected to the router. It is recommended to use a computer that is plugged into the AirStation with an Ethernet cable. . Launch the web browser on the computer that you’re going to use to configure the AirStation. (The computer used to configure the AirStation should be set to obtain an IP address automatically using a DHCP server.) .
Step 3: Configure Wireless Settings (with AOSS) AOSS (AirStation One-Touch Secure System) is a simple system for configuring your wireless network securely. If your router and your client device are installed and both support AOSS, then making a secure wireless connection between them is simple. If your client device doesn’t support AOSS or you wish not to set it up, turn to page 5.
Step 3: Configure Wireless Settings Manually (without AOSS) If your wireless client doesn’t support AOSS, you’ll have to configure the AirStation manually. From a web bowser or a PC on the network, log in to the AirStation Configuration Utility. Open a web browser, type http://192.168.11.1 into the address field and press Enter.
North American Technical Support by phone is available 24 hours a day, 7 days a week. (USA and Canada). Toll-free: (866) 752-6210 | Email: email@example.com European Technical Support is available between 9am-6pm (Monday-Thursday) (GMT) and 9am- 4:30pm on Fridays (GMT) Email: firstname.lastname@example.org...