Back Panel - Buffalo AirStation Nfiniti WZR-HP-G300NH User Manual

User-friendly firmware nfiniti high power wireless n router & access point
Hide thumbs Also See for AirStation Nfiniti WZR-HP-G300NH:
Table of Contents

Advertisement

Chapter 1 Product Overview

Back Panel

ROUTER
ON
OFF
AUTO
11
USB
EJECT
USB
LAN
1
2
14
3
4
16
INTERNET
POWER
14
LAN Port
15
LAN LED (Green)
WZR-HP-G300NH User Manual
10
Router Switch
Switches router mode between enabled, disabled, and auto.
On:
Off:
10
Auto:
12
13
11
USB Eject Button
To dismount a USB hard drive, hold down this button until
the USB LED flashes (about 3 seconds). The USB drive can
15
then be unplugged safely.
12
USB LED (Blue)
On:
Flashing: The USB disk can be removed.
17
Off:
Note: Never disconnect the USB disk or turn off the unit,
18
while the USB LED lights up.
13
USB Port
Connect the USB drive.
Note: Refer to the technical restriction on page 122.
Connect your computer, hub, or other Ethernet devices to these
ports. This switching hub supports 10Mbps,100Mbps, and 1000Mbps
connections.
On:
An Ethernet device is connected.
Flashing: An Ethernet device is communicating.
Router functionality is enabled (router mode).
Router functionality is disabled (bridge/AP
mode).
This switches between modes automatically
based on whether or not another router is
detected on the Internet port. The default setting
for this switch is Auto.
The USB disk is connected.
The USB disk is not connected.
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents