Managing Port Forwarding Rules; Adding The Airstation To A Wireless Network; Set Up The Airstation As An Extender - Buffalo AirStation WHR-1166D User Manual

Managing Port Forwarding Rules

Individual rules cannot be turned off. Only a rule group can be shut off. You can click Edit to make any changes to
individual rules, or Delete to remove the rule entry.

Adding the AirStation to a Wireless Network

If you have an existing wireless network, you can connect the AirStation to extend the wireless network range. Other
client devices (wired and wireless) will be able to connect to the AirStation to use the Internet.

Set Up the AirStation as an Extender

The AirStation can rebroadcast an existing wireless signal to extend the range. However, the AirStation will maintain its
own SSID and security settings.
1
Set the mode switch on the back of the AirStation to "Bridge".
2
Connect the AirStation to a computer with an Ethernet cable.
3
Move the AirStation next to the access point.
4
Open a web browser and enter the AirStation's IP address (default is 192.168.11.100).
5
Enter the administrator password and log in.
6
Navigate to Wireless - WB.
71