Disassembling / Assembling; Disassembly Procedure - Handicare Fortress 2000 SERIES Owner's Manual

The Fortress 2000 scooter has been designed to be disassembled and reassembled quickly, easily, and without
the use of tools. Should you have any difficulty during either the assembly or disassembly procedures, please
recheck the instructions and try again.
NOTE: Ensure the power is off before disassembly or re-assembly of your scooter.

DISASSEMBLY PROCEDURE

Release the seat lock mechanism and lift the seat off the scooter.
Remove rear shroud by pushing on the back side of the shroud to clear
the positioning tab.
Disconnect the following connectors from the controller box:
Both battery connectors (marked in red), the light package
connector (marked in yellow), and the charger connector located
on the side of the controller box (marked in red, white and black).
NOTE: These connectors have a safety latch feature to prevent
accidental disconnection. Press on each side of the connector to
release the latch before pulling.
Remove the battery cover by releasing the velcro on each side of
the floor pan.
If your scooter has a light package unplug the rear shroud lights
from the scooter before removing the cover.

DISASSEMBLING / ASSEMBLING

8