Reprogram Request (Astro 25 Trunking Only); Select Enable / Disable - Motorola Astro XTSTM 5000 User Manual

Reprogram Request (ASTRO 25 Trunking Only)

This feature lets you notify the dispatcher that you want a new
dynamic regrouping assignment.
1 Press the preprogrammed
Reprogram Request button.
The reprogram request is sent
to the dispatcher.
2 If you hear one beep, press the
PTT button to send the
reprogram request again.
OR
If you hear five beeps, the
reprogram request was
acknowledged by the
dispatcher.
OR
If the dispatcher does not
acknowledge the reprogram
request within six seconds, you
hear a low-pitched alert tone.
Try again.

Select Enable / Disable

The dispatcher can classify regrouped radios into either select
enabled or select disabled.
• Select-enabled radios are free to change to any available channel,
including the dynamic-regrouping channel, once the user has
selected the dynamic-regrouping position.
• Select-disabled radios cannot change channels. The dispatcher has
forced the radio to remain on the dynamic-regrouping channel.
The Scan or Private Call feature cannot be selected while your radio
is select disabled.
ASTRO XTS 5000 Model I
Special Radio Features
• Reprogram request sent
• One beep
• Five beeps
• Alert tone
37