Dynamic Regrouping (Trunking Only); Reprogram Request (Astro 25 Trunking Only) - Motorola ASTRO XTS 5000 User Manual

Dynamic Regrouping (Trunking Only)

The dynamic regrouping feature lets the dispatcher temporarily
reassign selected radios to a single special channel so they can
communicate with each other. This feature is typically used during
special operations and is enabled by a qualified radio technician. You
will not notice whether your radio has this feature enabled until a
dynamic regrouping command is sent by the dispatcher.
Note: If you try to access a zone or channel that has been reserved
by the dispatcher as a dynamically regrouped mode for other
users, you will hear an invalid tone.
When your radio is dynamically regrouped, it automatically
switches to the dynamically regrouped channel. You see the
dynamically regrouped channel's name, and hear a "gurgle"
tone.
Press the PTT button to talk; release it to listen.
When the dispatcher cancels dynamic regrouping, the radio
automatically returns to the zone and channel that you were
using before the radio was dynamically regrouped.

Reprogram Request (ASTRO 25 Trunking Only)

This feature lets you notify the dispatcher that you want a new
dynamic regrouping assignment.
Use the Menu
Press u to find RPGM.
1
Press D, E, or F
2
directly below RPGM.
The reprogram request is sent
to the dispatcher.
ASTRO XTS 5000 Model II
Special Radio Features
RPGM
REPRGRM RQST
83