Battery Installation; Removing Battery; Inserting Battery - SoftBank 106SH User Manual

Battery Installation

Inserting Battery

Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
along edges to remove it.
Insert Battery
・With Battery tab facing up, align Battery terminals with
charging terminals.
・Take care not to get Battery tab caught between base and
Battery Cover.
Replace Battery Cover
・Align Battery Cover with handset, then firmly press down
along shaded areas.
・Close Battery Cover firmly. Debris trapped between battery
housing area and Battery Cover gasket may expose handset
to liquid/dust.

Removing Battery

Always power off before removing Battery.
Remove Battery Cover
・Use notch (○) to lift Battery Cover. Push up Battery Cover
along edges to remove it.
Remove Battery
・Take hold of Battery tab (printed PULL) and gently lift
Battery as shown.
・Fold back Battery tab to black area; may get caught
between base and Battery Cover upon replacing Battery
Cover.
・If Battery tab rips off and Battery cannot be removed,
contact a SoftBank Shop.
Replace Battery Cover
・Align Battery Cover with handset, then firmly press down
along shaded areas.
・Close Battery Cover firmly. Debris trapped between battery
housing area and Battery Cover gasket may expose handset
to liquid/dust.
Lithium-ion Battery
This product requires a lithium-ion battery. Lithium-ion
batteries are recyclable. To recycle a used lithium-ion
battery, take it to any shop displaying the symbol below.
・To avoid fire or electric shock, do not short-circuit or
disassemble Battery.
15