Thread Cutter; Reverse Sewing - Toyota SP100 Series Instruction Manual

Thread cutter

z
For model XXX15C
„
Line up the two threads, and cut
them with the thread cutter on the
presser bar.
For model SuperJ15
„
Line up the two threads, and cut
them with the thread cutter on the
face cover.

Reverse sewing

z
Reverse sewing is performed at the beginning and the end of sewing to prevent the
thread from unraveling.
Reverse sewing is performed while
pressing down the reverse sewing
lever.
• Stitch 1 cm from the edge of the
fabric to prevent unraveling at the
start of sewing.
• Sew 3 to 4 reverse stitches at the
end of sewing.
Note:
Remove your finger from the
reverse sewing lever to return to
forward direction sewing.
Thread cutter
Thread cutter
Reverse sewing
lever
3
29