Recommended Minimum Clearances; For Servicing; Mounting The Water Heater - Bosch TRONIC 5000C Pro Installation Manual And Operating Instructions

US
4.2.2 Recommended minimum clearances for
servicing
Should it be necessary to service the Tronic 5000C Pro,
observe the following clearances. These are not required
clearances, but would facilitate any service work.
Fig. 5

Recommended minimum clearances

Top (A)
Sides
Bottom (B)
Front (C)
Tab. 6 Recommended minimum clearances
Copyright
WH17 WH27
12" 12"
0" 0"
6" 6"
12" 12"
4.3

Mounting the water heater

WARNING:
B The heater must only be installed in the
orientation shown in Fig. 6 i.e., mounted
in a vertical position with the water
fittings located at the bottom of the
heater. Under no circumstances should
the heater be mounted differently.
B Undo the retaining screws on the front cover and take
the cover off the heater. Hold the back plate in
position against the wall and mark the four mounting
holes.
B Drill the holes and secure the heater using the four
wood screws supplied.
Fig. 6 Vertical mounting position
Installation | 13
6 720 646 951 (2011/09)