Sony Bravia KDL-37S4000 Operating Instructions Manual page 30

AV Set-up
30
GB
Auto Adjustment Automatically adjusts the display position and phase of the
picture when the TV receives an input signal from the
connected PC.
z
• "Auto Adjustment" may not work well with certain input
signals. In such cases, manually adjust "Phase" and
"Horizontal Shift".
Phase
Adjusts the phase when the screen flickers.
Pitch
Adjusts the pitch when the picture has unwanted vertical
stripes.
Horizontal Shift Adjusts the horizontal position of the picture.
Power Switches the TV to standby mode if no signal is received for
Management 30 seconds.
Video Labels Assigns a name to equipment connected to the side and rear
jacks. The name appears briefly on the screen when you
select the equipment. You can skip input sources from
connected equipment that you do not want displayed on the
screen.
1
2
Equipment
labels
Edit:
Skip
Speaker TV Speaker
Audio System
Audio Out Variable
Fixed
Press F/f to select the desired input source, then press
.
Press F/f to select the desired option, then press
Uses preset labels to assign a name to
connected equipment.
Allows you to create your own label.
Press F/f to select the desired letter or
number, then press g. Repeat this step
until you complete the name, then select
"OK" and press
Skips unnecessary input sources.
Turns on and outputs the TV's sound
from the TV speakers.
Turns off the TV speakers and outputs the
TV's sound from external audio
equipment connected to the audio output
jacks on the TV.
You can also turn on the connected
equipment that is compatible with control
for HDMI, after making the appropriate
settings of control for HDMI.
Allows you to use the TV's remote to
control audio output from an audio
system connected to the TV.
The audio output of the TV is fixed. Use
your audio receiver's volume control to
adjust the volume (and other audio
settings) through your audio system.
.
.