Sony Bravia KDL-37S4000 Operating Instructions Manual page 27

Advanced Settings
Sound
Sound Mode
Reset
Treble
Bass
Balance
Intelligent Volume
Volume Offset
Surround
Voice Zoom
Sound Booster
Dual Sound
Allows you to set "Picture" settings in more detail. These settings are not available
when "Picture Mode" is set to "Vivid".
Adv. Contrast Automatically adjusts "Backlight" and "Picture" to the most
Enhancer suitable settings judging from the brightness of the screen.
This setting is especially effective for dark images scenes,
and will increase the contrast distinction of the darker picture
scenes.
Live Colour Makes colours more vivid.
Sets the sound mode.
Dynamic Enhances treble and bass. Recommended for home
entertainment.
Standard For standard sound.
Clear Voice
Makes voice sound clearer.
Resets all the "Sound" settings to the factory settings excluding "Dual Sound".
Adjusts higher-pitched sounds.
Adjusts lower-pitched sounds.
Emphasises the left or right speaker.
Keeps volume level constant across all programmes and adverts (e.g. adverts tend
to be louder than programmes).
Sets an independent volume level to each equipment connected to the TV.
S-FORCE Front Available for normal stereo broadcast and 5.1ch broadcast
Surround surround audio, and the audio input from connected
equipment.
Simulated Stereo Adds a surround-like effect to mono programmes.
Off
Converts and reproduces 5.1ch and other broadcast surround
audio as normal stereo audio (2ch). Reproduces the original
audio of other broadcasts as is.
Adjusts the clarity of human voices. For example, if the voice of a news announcer
is indistinct, you can turn up this setting to make the voice clearer. Conversely, if
you are watching a sports programme, you can turn down this setting to soften the
voice of the commentator.
Gives sound more impact by compensating for phase effects in speakers.
Sets the sound from the speaker for a stereo or bilingual broadcast.
Stereo/Mono
For stereo broadcasts.
Main/Sub/Mono For bilingual broadcasts, select "Main" for sound channel 1,
"Sub" for sound channel 2, or "Mono" for mono channel, if
available.
~
• For other equipment connected to the TV, set "Dual Sound" to "Stereo", "Main",
or "Sub".
• When you connect an external equipment to the HDMI jack, "Dual Sound" is
automatically set to "Stereo" (except when using the audio in jacks).
27
GB