Setup ........4 Specifications ......10 Sensor Setup ......4 FCC Information ....10 Display Setup ......5 Customer Support ....11 Atomic Clock ......6 Warranty......11 Questions? Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com. SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits 18 17 14-day Learning Mode DISPLAY UNIT 16. Current Outdoor Humidity 6. Outdoor High Temperature Record 17. Outdoor Sensor Signal Strength Highest temperature since midnight. 18. Current Outdoor Temperature 7. Outdoor Low Temperature Record Lowest temperature since midnight. BACk OF DISPLAY UNIT 8.
2. Install or Replace Batteries 2. Insert 2 x AA batteries into the AcuRite recommends high quality battery compartment, as shown. alkaline or lithium batteries for the Follow the polarity (+/-) diagram best product performance.
Display Unit Setup Set the A-B-C Switch Install or Replace Batteries 1. Remove the battery Locate the A-B-C switch inside the compartment cover. battery compartment. Set the A-B-C switch to A, B or C. You must select 2. Insert 3 x AA alkaline batteries the same letter choices for both the into the battery compartment, display unit and the sensor in order...
Atomic Clock AcuRite atomic clocks use a radio-controlled signal to synchronize to the correct time broadcast by the National Institute of Standards and Technology (NIST) Radio Station WWVB, located near Fort Collins, Colorado. WWVB broadcasts the current time and date with split-second accuracy.
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust.
Weather Forecast AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy - personalized for your exact location.
(see page 7). temperature or humidity • Make sure both units are positioned away from moisture sources (see page 7). If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Outdoor Sensor Care Clean with a soft damp cloth. Do not use caustic cleaners or abrasives. Specifications Outdoor: -40ºF to 158ºF;...
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 email@example.com AcuRite 24/7 support at www.
Plan your day with confidence ™ www.AcuRite.com Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented...