Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits 19 18 17 16 DISPLAY FRONT 1. AUTO DIM Icon 9. Learning Mode Icon Disappears after weather forecast Indicates display is in auto-dimming self-calibration is complete. brightness mode (see page 7). 2. Current Outdoor Temperature 10. Moon Phase Arrow icon indicates the direction the 11.
Features & Benefits DISPLAY BACK Button 7. RESET Button Press to access all-time high and Full reset to factory defaults. low records. 8. Power Adapter Button 9. Plug-in for Power Adapter For setup preferences. 10. A-B-C Switch Button ID code that must match sensor’s A-B-C For setup preferences.
A-B-C switch setting inside the battery Install or Replace Batteries compartment. AcuRite recommends high quality 2. Insert 2 x AA batteries into alkaline or lithium batteries for the battery compartment, as the best product performance.
Display Setup Set the A-B-C Switch 2. Insert 3 x AA alkaline batteries into the battery Locate the A-B-C switch inside compartment, as shown. the battery compartment. Set Follow the polarity the A-B-C switch to A, B or C. (+/-) diagram in the You must select the same letter battery compartment.
Intelli-Time Clock ® Intelli-Time products are pre-programmed with the correct time and date. Intelli-Time technology instructs the time and date to set themselves. All you need to do is select your Time Zone and Daylight Saving Time preferences. The clock will then automatically set itself and change for Daylight Saving Time. Set the Time, Date &...
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display and outdoor sensor are critical to the accuracy and performance of this product. Display Placement Place the display in a dry area free of dirt and dust. Display stands upright for tabletop use or is wall-mountable.
Weather Forecast AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy - personalized for your exact location.
High & Low Records Today’s high and low records are displayed for indoor and outdoor temperature and humidity. Today’s records automatically clear at 12:00am midnight every day. To manually clear all of today’s LOW recorded values, press and hold the “...
8). • Make sure both units are positioned away from moisture or humidity sources (see page 8). If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.
Care & Maintenance Display Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Outdoor Sensor Care Clean with a soft damp cloth. Do not use caustic cleaners or abrasives. Calibration The indoor / outdoor temperature and humidity readings, and barometric pressure can be calibrated on the display to improve accuracy.
Replace Intelli-Time Battery ® Intelli-Time technology is powered by a pre-installed coin-cell battery that stores the CR2032 time and date settings. The battery has a shelf life of several years. Time and date will need to be entered after replacing Intelli-Time battery.
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 AcuRite Visit us at www.