Push Button Functions; Table 22. Push Button Functions - Wegener UNITY4000 Instruction Manual

Page 42
However, there may be times when you want to leave a screen displayed for more than five
minutes. To do this, display the screen you wish to ÒPark,Ó press and hold the <ENTER> key,
and press the < ° > (left arrow) key. This will leave the current screen displayed until you
press any other key on the front panel.
3.9.2

Push Button Functions

LCD MODE PUSH
BUTTON
SELECT
ENTER
∧ (UP)
HOME
∨ (DOWN) N/A
> (RIGHT) Enters MENU mode.
< (LEFT)
SELECT
ENTER
∧ (UP)
MENU
∨ (DOWN) N/A
> (RIGHT) Scrolls forward through MENU selections.
< (LEFT)
SELECT
ENTER
∧ (UP)
PARAMETER
∨ (DOWN) N/A
> (RIGHT) Scrolls forward through PARAMETER selections.
< (LEFT)
SELECT
ENTER
∧ (UP)
EDIT
UTY4000-011

Table 22. Push Button Functions

FUNCTION
N/A
Shows unit serial number for approximately 2 serconds
N/A
Enters MENU mode.
Enters PARAMETER mode
N/A
N/A
Scrolls backward through MENU selections.
Enters EDIT mode or exits EDIT mode (depending on displayed
parameter)
N/A
N/A
Scrolls backward through PARAMETER selections.
Cancels changes, leaves EDIT mode, and enters PARAMETER
mode.
Enters changes.
Increases value of number in edit field or scrolls up to next choice
in list. In number field, button increments once per button push
or can be held to scroll. Button acceleration occurs when push-
button is depressed for more than 5 seconds.
Page 42 of 75