Safety Rules - Husqvarna 136 Operator's Manual

Husqvarna chainsaw user manual
Hide thumbs Also See for 136:
Table of Contents

Advertisement

_WARNING:
Always
disconnect
spark plug wire and place wire where it can-
not contact spark plug to prevent accidental
starting
when setting up, transporting,
ad-
justing or making repairs except carburetor
adjustments.
Because a chain saw is a high-speed wood-
cutting tool, special safety precautions must
be observed to reduce the risk of accidents.
Careless
or improper
use of this tool can
cause serious injury.
PLAN
AHEAD
• Read this manual carefully until you com-
pletely understand and can follow all safe-
ty rules, precautions,
and operating
in-
structions
before attempting
to use the
unit.
• Restrict the use of your saw to adult users
who understand
and can follow safety
rules, precautions, and operating instruc-
tions found in this manual.
Hearing
Safety Hat
Protection
_
Eye
"_l
_
Protection
Snug
Fitting "'",_,/
Heavy Duty
Clothing
_
Gloves
#-
Safety
Safety Chaps
Shoes
• Wear protective gear. Always use steel-
toed safety footwear with non-slip soles;
snug-fitting clothing; heavy-duty,
non-slip
gloves; eye protection
such as non-fog-
ging, vented goggles or face screen; an
approved safety hard hat; and sou nd barri-
ers (ear plugs or mufflers) to protect your
hearing. Regular users should havehear-
ing checked regularly as chain saw noise
can damage hearing. Secure hair above
shoulder length.
• Keep all parts of your body away from the
chain when the engine is running.
• Keep children, bystanders, and animals a
minimum of 30 feet (10 meters) away from
the work area. Do not allow other people
or animals to be near the chain saw when
starting or operating the chain saw.
• Do not handle or operate a chain saw
when you are fatigued, ill, or upset, or if you
have taken alcohol, drugs, or medication.
You must be in good physical condition
and mentally alert.
Chain saw work is
strenuous.
If you have any conditionthat
might be aggravated
by strenuous work,
check with your doctor before operating a
chain saw.
3
• Carefullyplan
your sawing operationin
ad-
vance. Donor startcuttinguntilyou
havea
clearwork area, secure footing, and, if you
are felling trees, a planned retreat path.
OPERATE
YOUR
SAW
SAFELY
• Do not operatea chain saw with one hand.
Serious injury to the operator, helpers, by-
standers or any combination of these per-
sons may result from one-handed opera-
tion.
A
chain
saw
is
intended
for
two-handed use.
• Operatethe chain saw only in a well-venti-
lated outdoor area.
• Do not operate saw from a ladder or in a
tree.
• Make sure the chain will not make contact
with any object while starting the engine.
Never try to start the saw when the guide
bar is in a cut.
• Do not put pressure on the saw at the end
of the cut. Applying pressure can cause
you to lose control when the cut is com-
pleted.
• Stop the engine before setting the saw
down.
• Do not operate a chain saw that is dam-
aged, improperly
adjusted,
or not com-
pletely and securely assembled.
Always
replace bar, chain, hand guard, or chain
brake immediately if it becomes damaged,
broken or is otherwise removed.
• With the engine stopped, hand carry the
chain saw with the muffler away from your
body, and the guide bar and chain to the
rear, preferably covered with a scabbard.
MAINTAIN
YOUR
SAW
IN
GOOD
WORKING
ORDER
• Have all chain saw service performed by a
qualified service dealer with the exception
of the items listed in the maintenance sec-
tionofthis manual. Forexample,
if improp-
er tools are used to remove or hold the fly-
wheel when servicing the clutch, structural
damage
to the flywheel
can occur and
cause the flywheel to burst.
• Make certainthe
saw chain stops moving
when the throttle trigger is released.
For
correction,
refer to CARBURETOR
AD-
JUSTMENTS.
• Never modify your saw in any way.
• Keep the handles dry, clean, and free of oil
or fuel mixture.
• With the engine stopped, hand carry the
chain saw with the muffler away from your
body, and the guide bar and chain to the
rear, preferably covered with a guide bar
cover.
• Keep fuel and oil caps, screws, and fas-
teners securely tightened.
• Use only Husqvarna accessories
and re-
placement parts as recommended.
HANDLE
FUEL
WITH
CAUTION
• Do not smoke while handling fuel or while
operating the saw.
• Eliminateall
sources of sparks or flame in
the areas where fuel is mixed or poured.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

141

Table of Contents