Lubricating The Bevel Gears - Pfaff 335 Instruction Manual

10

Lubricating the bevel gears

.06
Fig. 10 - 06
Top bevel gears
Unscrew the cover on the rear side of the machine.
●
Apply fresh grease to the top bevel gears 1.
●
Screw the cover to the rear side of the machine again.
●
Bottom bevel gears
Remove screw 2 and tilt the machine back.
●
Apply fresh grease to the bottom bevel gears 3.
●
Retighten screw 2.
●
1
Switch off the machine!
Danger of injury due to unintentional starting of the machine!
All bevel gears must be supplied with new grease once a year.
Use both hands to set the sewing head upright!
Danger of crushing between the sewing head and the table top!
We recommend PFAFF sodium grease with a dripping point of approx. 150C,
Order No. 280-1-120 243.
Care and maintenance
Fig. 10 - 07
3
2
33