Setting Up; Inserting The Needle - Pfaff 335 Instruction Manual

9

Setting up

9

Inserting the needle

.01
Fig. 9 - 01
All instructions and regulations in this instruction manual must be observed.
Special attention must be given to all safety regulations!
All setting-up work must only be done by personnel with the necessary train-
ing. For all setting-up work the machine must be isolated from its power supply
by turning off the on/off switch or removing the machine plug from the electric
power socket!
1
Raise needle bar.
●
Loosen screw 1 and insert needle until
●
you feel it stop.
The long needle groove must be aligned
●
in the direction of the machine head.
Tighten screw 1.
●
Setting up
Switch the machine off!
Danger due to unintentional
starting of the machine!
Only use needles from the sys-
tem intended for the machine,
see Chapter 3 Specifications.
25