Saw Chain Filing And File Gauges - Husqvarna 1151338-95 Operator's Manual

Recommended original and replacement bar and chain combinations
The Husqvarna 395XP is in the ANSI category of saws above 3,8 cu. in. and is not required to comply with low kickback
performance requirements. However, for this model we recommend the following cutting equipment.
Length, inch Pitch, inch
18 3/8
20 3/8
24 3/8
28 3/8
Note: For the chains above you are free to choose between 0,050", 0,058" and 0,063" gauge drive link for the
corresponding bar, see the table below.
0,050"/1,3 mm
0,058"/1,5 mm
0,063"/1,6 mm
!
Saw chain filing and file gauges
40 – English
TECHNICAL DATA
Bar
Gauge, inch
0,058
H46 H47
H42 H48
H45 H50
WARNING! This chain saw model is capable of severe kickback that could result in
serious injuries to the user. Do not operate this saw unless you have extraordinary
cutting needs and experience and specialized training for dealing with kickback. Saws
with significantly reduced kickback potential are available. Always use the safest saw
and cutting equipment applicable to your cutting need.
Max. nose radius
11T
11T
11T
11T
Chain
Type Drive link count
68
72
Husqvarna H42,
Husqvarna H48
84
93