Saw Chain Filing And File Gauges - Husqvarna 136 Li Operator's Manual

Recommended cutting equipment for USA
Following is a list of recommended cutting equipment for Husqvarna cordless chain saw model 136Li. This chain saw
model equipped with either of the listed guide bar and saw chain combination(s), fulfills the requirements according to
UL 1662 - 2009 and UL 60745-1 - 2011.
Chain saw model Husqvarna 136Li met the kickback performance requirements of ANSI B175.1-2012 when tested with
the combinations of bars and saw chains listed below. The saw chain Husqvarna H38 is also classified as a low kickback
saw chain since it met the requirements for low kickback saw chain outlined in ANSI B175.1-2012. We recommend to
use only the listed combinations of bars and chains for chain saw model Husqvarna 136 Li. Other chain saw models may
not meet the kickback requirements when equipped with the listed guide bar and saw chain combinations.
Recommended cutting equipment for Canada
Following is a list of recommended cutting equipment for the Husqvarna cordless chain saw model 136 Li. The listed
combination(s) of powerhead, guide bar and saw chain meet all requirements outlined in Canadian Standards
Assosiation Z62.1-11 (Chain Saws) and Z62.3-11 (Chain Saw Kickback).
Furthermore the saw chain Husqvarna H38 is evaluated and listed as a Type C Low Kickback Saw chain according to
the provisions in Z62.3-11.
Kickback information
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy.
The following cutting attachments are approved for the model Husqvarna 136 Li.
Length, inch Pitch, inch
12 3/8
Saw chain filing and file gauges
1156931-49 Rev.1 2015-04-30
TECHNICAL DATA
Guide bar
Gauge, inch
0.043
Max. nose radius Type
9T Husqvarna H38
Saw chain
Drive link count
45
English – 33