Table of Contents
Advertisement
Installing Zoom Clamp/Sleeve on Type 2 Lenses
Before installing the lens port and checking operation, make sure the
teeth on the Gear Sleeve mesh with the teeth on the housing Drive Gear,
shown below. When the port is installed, pages 19 & 20, it will lock the
Gear Sleeve in place. After installing the port, rotate the housing Zoom
Control Knob to see that the Gear Sleeve is properly rotating the Lens
Zoom ring.
Manual Focusing
Ikelite DSLR housings are designed for auto-focus DSLR
cameras and lenses. Manual focusing is not recommended. In some
cases, if you desire to manually focus a lens, the zoom clamp must be
moved onto the lens Manual Focus Ring and you must use the housing
Zoom Control K nob to manually focus. This will result in loss of zoom
capability.
Port Lock
18
IKELITE
- continued
Port Lock
Release
Button
Figure G
Zoom
Control
Knob
Mesh
Gear Sleeve
teeth with
Black
Housing
Drive Gear
Advertisement
Table of Contents
