Table of Contents
Advertisement
Rear View of the DVD-RAM Drive
The following shows the rear of the DVD-RAM drive.
Notes:
1. The 7210 DVD-RAM Drive uses a 68-pin internal SCSI bus connector.
2. The parity jumper must not be removed. When connecting the internal SCSI
Cleaning the DVD-RAM Drive
The DVD-RAM drive is designed to limit air flow in the area where the optical
components are located. However, the DVD media and drive heads occasionally
need to be cleaned. Use the IBM DVD cleaning kit shipped with the device, which
includes a cloth and cleaning disc, to clean the media and drive heads.
To avoid fingerprints, always handle DVD discs by the edges. Wipe DVD discs
with a soft, lint-free cloth or lens tissue, always wiping in a straight line from the
inner hub to the outer rim. Do not rub in a circular motion.
6
7210 DVD-RAM Drive Service Guide
address cable, insert the cable into the left side of the remote SCSI address
connector.
1
Analog audio output jack
2
Internal SCSI bus connector
3
Power supply connector
4
SCSI address connector
5
Adapter
RBBTP508-1
Advertisement
Table of Contents
