Sharp ZQ-570 Operation Manual page 10

4. Replace the cover.
5. Set the battery replacement switch back to NORMAL
OPERATION (the red dot disappears).
The Organizer will not function unless the battery
replacement switch is in the NORMAL OPERATION
position.
Initializing
The Organizer must be initialized when it is used for the first
time.
1.
Press and hold the [ON] key.
2. While holding down the [ON] key, push the RESET button
on the bottom of the Organizer using a pen or some other
pointed object. The following message will appear.
Do you rea lly want
to initialize the
o r g a n i z e r ' s memory
(this will delete
a l l data)?
3. Press [Y] to initialize the Organizer.
The message "Working...Please Wait." appears while the
Organizer proceeds with the initialization procedure.
8
The LCD Contrast screen then appears.
4. If the display is not clear, press [A
and [NEXT] until the display is satisfactory.
5. Press [ENTER] when ready.
The Replacing Batteries Alert message will be shown. Press
[ENTER] and the Organizer will automatically start the SETUP
utility, so that the owner information, the time and date and
various other settings are defined before use.
]
and or [PREV]