Table of Contents
Advertisement
Installation
When installing on a adapter plate
1) Place the bracket provided on the
An arrow for installing directions
adapter plate
2) When placing the camera body on the
3) When placing the camera body on the
M4 tapping
screw (provided)
CAMERA
4) After installation and adjustment of the
Locking
direction
Unlocking
direction
Dome cover
Notes
• Please locate an arrow on bracket for installing direction that you wish to observe
Area and then fix it with the M4 tapping screws.
14
COLOR CCD CAMERA
installation surface and fix it with the M4
tapping screws (provided).
(Select either 85X85 or 83.5X46)
plate, insert the plate pin into the
mounting hole on the body as shown in
figure-1 and fix it by turning clockwise.
plate, make sure the power and the BNC
cables pass through their respective
designated holes.(When placing the
cable through its side, thread it through
the hole at the bottom.)
camera are complete, secure the dome
cover by turning it clockwise.
Plate pin
Locking direction
Unlocking direction
[Figure-1]
User's Manual
Adjust the panning and tilting, rotating while watching the monitor
145˚
170˚
Pan Base
-170˚
1) You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism.
• Pan Base moves by 170˚ to each side direction and 340˚ on the whole.
• Tilt Base covers total 146˚ angle(73˚ to each side).
• Angle range of Rotate Base is the same as that of Pan Base. But One side range is 195˚
and another is 145˚.
2) Methods of adjustment
•The case of wall installation
After mounting the camera on a wall, adjusting the panning angle so that the camera can
face the direction to monitor when tilting.
And then adjust the tilting angle by rotating the tilt base.
Loosen the rotate base hold screw and adjust rotate base for the best monitoring.
Tighten the rotate base hold screw.
•The case of ceiling installation
After mounting the camera on a ceiling, adjusting the panning angle for better monitoring
area by rotating the pan base.
And then adjust the tilting angle by rotating the tilt base.
COLOR CCD CAMERA
73˚
195˚
Tilt Base
Rotate Base
15
User's Manual
Advertisement
Table of Contents
