Disc/Usb Interface; Av-In Mode; Setting Control - Power Acoustik PD-701 Owner's Manual

◆DISC/USB INTERFACE

When a file disc, USB or a memory card is played, the screen will show following interface:

◆AV-IN MODE

To start AV-IN Mode, tap on AV-IN button from main menu screen.
Connect the external audio/video signal source to this unit. Select AV-IN mode in the main
menu or by pressing repeat Mode button on the front panel.
Note: If there is no external video input, the TFT displays
"NO VIDEO SIGNAL".
1. Press the △ / ▽ icon to adjust TFT angle.
2. Press the icon to be back to main menu.

◆SETTING CONTROL

Your device has default system settings. You can customize the settings to suit your personal
needs. Once you change settings, your new settings will remain until you change it again.
To start SETTING, tap setting button from main menu screen.
Mute the sound.
Stop button. Press it to stop playback from the
current track, press it again to final stop to the very
beginning
Play/pause button. Press it to pause the track,
press again to resume.
Press it button to restart a track,
FR×2×4×8×20-play will be display.
Press it button to skip to the next track.
FF×2×4×8×20-play will be display.
Press it to skip to the previous track.
Press it to skip to the next track.
Press it to activate the intro function. You can
play the beginning of every track for 10 seconds in
sequence.
Press it to repeat REP 1 => REP DIR => REP
ALL
Press it to play track randomly.
Press it to enter previous page.
Press it to enter next page.
Press it to go to folder selection.
15