Tv Section (Only For Pd-701T) - Power Acoustik PD-701 Owner's Manual

TV SECTION (ONLY FOR PD-701T)

To enter TV mode, you can tap TV icon on main menu screen or press mode on front panel or
remote.
1. Connect TV antenna to the TV ANT wire in rear unit, and then press MODE button on front
panel or remote to select TV mode or Tap TV icon on main menu screen to enter TV mode.
2. In TV mode, press the Play/Pause buttons on front panel or remote once to enter TV menu
setting, or press touch screen to choose TV MENU icon to enter TV MENU.
3. Press the / on remote or tap the screen to select one of the setup pages: Auto program
=> Manual program.
4. Press the ENTER button on remote or tap "Auto program or Manual program" on screen to
enter the page.
5. Press the / on remote buttons or tap relevant option to select the setting.
6. Press ENTER on the remote again to confirm, tap BACK to return to the setup page.
7. Press the △/ ▽Icon to adjust TFT angle.
8. Press the icon to be back to main menu.
Note: This function is available when TV tuner is connected.
TV MENU
Auto program (Auto seek mode)
System
Select this menu item is to set TV system: NTSC=>PAL=>SECAM, press ENTER button on
remote or tap the screen to select.
Audio
Select this menu item is to set the TV sound system:
when system setting PAL,TV sound system can set B/G=>I=>D/K=>/M/N, press ENTER on
remote or tap the screen button to select.
When system setting SECAM, TV sound system can set B/G=>I=>D/K, press ENTER on
remote or tap the screen button to select.
When system setting NTSC, press
Search
Select this menu item is to start searching and storing stations automatically.
Manual program (manual seek mode)
Storage
Select this menu item is to set the storage number.
System
Select this menu item is to set TV system: SECAM => NTSC =>PAL ，press NTER button on
the remote or tap the screen to select.
button to automatic skip search term.
20