Set The Clock (Clk); Change The Source (Mode); Mute On/Off; Loudness On/Off - Power Acoustik PL-52B User Manual

2 din car am/fm radio, mech-less mp3 player with usb/sd card inputs
Table of Contents

Advertisement

GENERAL OPERATION (CONT.)

Set the Clock (CLK)

1. To display clock time, press the
2. To set clock time, press and hold the
3. Press the
or
4. Press the
CLK
button and the minutes will flash.
5. Press the
or
6. Note: During Bluetooth mode, the clock can not be adjusted.

Change the Source (MODE)

Press the
MODE
button to switch between RADIO, BT(Bluetooth), USB(with USB device
inserted), CARD(with SD card inserted) and AUX-IN(auxiliary input) modes.

Mute on/off

In power on mode, briefly press the
will be also released when the volume knob is used.

Loudness on/off

Press the
LOUD
button on the remote control to turn on the loudness to reinforce the output
of bass frequencies, press again to turn it off.

Preset Equalizer(EQ)

Press the
EQ
button on the front panel or on the remote control to toggle between EQ OFF,
FLAT, POP, ROCK, CLASS.

USB port

The USB port of this car radio is designed for media playback from flash memory devices.
Note: This USB port is not designed to charge high-power devices.

Micro SD card slot

This micro SD card slot is designed for media playback from micro SD card.

Built-in Microphone

To receive your voice when you calling by using this bluetooth handsfree system.

Aux input connector

The 3.5mm auxiliary input stereo connection is designed for deiveces with 3.5mm line-out or
headphone output.
6
CLK
button.
CLK
button on the front panel or on the remote control to adjust the hour.
button on the front panel or on the remote control to adjust the minute.
MUTE
button and the hour will flash.
button to toggle mute on or off.
The muted state

Advertisement

Table of Contents
loading

Table of Contents