System Setting - Samsung SMT-W5100E User Manual

If [Off] has been selected at Step 1 (normal AP access)
1
Enter the System IP address.
2
The next steps are the same as Step 1 to 9 of System DHCP
mode registration.

System Setting

While using a phone registered to a system, you can transfer to another system for connection.
To use this function, the phone should already be registered to the system.
[MENU] 8. System
2. System Setting
[OK] Confirm the information of the system
Inquire your system administrator for information on whether the system connected to
the phone is Sytem1~System4. To newly register a phone to System2, select System2
and register the phone according to the 'Phone Registration' procedure described
earlier.
[OK] Enter the password
[OK] (Select system)
Home Page
[OK]
[OK]
48
Table of Contents