Program Msg (Programmed Message); Phone Lock; Intern. Lock (Internal Lock) - Samsung SMT-W5100E User Manual

Program Msg (Programmed Message)

This function enables to advise your absence by sending a programmed message to the caller,
when you are in absence.
[MENU] 7. Phone Settings
9. Program Msg [OK]
[OK]
- To set the programmed message, select [1. On]
- To cancel the programmed message setting, select [2. OFF].
- Up to 20 programmed messages can be selected.
- In the programmed message setting, the programmed message is
displayed on the caller's phone screen, when the called attempt to call
you.

Phone Lock

When the Phone lock is set, no keys of the phone will work, and functions other than answering a
call cannot be used until you enter the password.
[MENU] 7. Phone Settings
0. Phone Lock [OK]

Intern. Lock (Internal Lock)

This function enables to lock incoming/outgoing calls to prevent others from using your phone
without permission.
[MENU] 7. Phone Settings
*. Intern. Lock [OK]
[OK]
- To disable the lock function, select [1. Unlock].
- To lock an outgoing trunk call, select [2. Lock Outgoing]. At this time,
outgoing (incoming) calls are allowed.
- To lock all outgoing/incoming trunk/station calls, select [3. Lock All
Calls].
- If the lock mode is set up, 'LCK' is displayed on the phone screen.
[OK] Enter a password
1. On (Select a message)
[OK] Enter a password
[OK] Enter a password
(Select lock option)
41
Home Page
Table of Contents