Samsung SMT-W5100E User Manual page 47

Select the Encryption Key mode.
7
- If you have selected SSID Auto input at Step 1, you can register
the handset without entering the encryption key depending on
the encryption key setting on the AP(Access Point).
If an encryption key has not been enabled on the AP, Step 7 and
8 will be skipped and the user will be directed to the registration
screen automatically.
If an encryption key has been enabled on the AP, an automatic
search will run to detect encryption mode, and will switch to an
input screen of the relevant mode.
- If the encryption mode is WEP: ASCII mode or HEX mode screen
will be displayed.
- If encryption mode is WPA_PSK or WPA2_PSK: TKIP/AES mode
is automatically recognized and an encryption input screen is
displayed.
- If Manual has been selected at Step 1, a screen is displayed as
shown to the right.
- As for its availability, refer to your system administrator.
- In case a WEP key has been enabled, select ASCII Mode or
HEX Mode to enter the WEP Key.
- In case a WPA_PSK or WPA2_PSK key has been enabled, select
AES Mode or TKIP Mode to enter the Encryption Key.
8
Enter the Encryption key and press the [OK] button.
- Encryption key: Enter the Encryption key into the WLAN
connection device. Refer to your system administrator to verify
the Encryption key.
- If no Encryption key is present, leave it blank and press [OK].
9
When the phone is successfully registered, the display will
appear as on the right.
Home Page
45
Table of Contents