Motorola APX 6000 User Manual page 125

Procedure:
You hear a voice announcement when the features below are
preprogrammed in the radio.
•
The radio powers up. The radio announces the current zone
and channel it is transmitting.
•
Press the preprogrammed voice announcement button
(which specifically programmed to playback the current zone
and channel). The radio announces the current zone and
channel it is transmitting.
Note: Pressing this preprogrammed playback button will
always enable the voice feature to announce in High
priority.
All the three programmable buttons at the side of the
radio support this feature.
•
Change to a new zone. The radio announces the current
zone and channel it is transmitting.
•
Change to a new channel remaining within the current zone.
The radio announces the current channel.
•
Press either the Menu Select button or preprogrammed
button or switch of the radio to launch or terminate Scan, PL
Disabled, Talkaround/Direct or Transmit Inhibit. The radio
announces the corresponding feature activation or
deactivation.
109
English