Using The Time-Out Timer; Setting The Time And Date; Editing The Time And Date - Motorola APX 6000 User Manual

Model 2
Hide thumbs Also See for APX 6000:
Table of Contents

Advertisement



Using the Time-Out Timer

This feature turns off your radio's transmitter. You cannot
transmit longer than the preset timer setting.
If you attempt to do so, the radio automatically stops your
transmission, and you hear a talk-prohibit tone.
The timer is defaulted at 60 seconds, but it can be
preprogrammed from 3 to 120 seconds, in 15-second intervals,
or it can be disabled entirely for each radio mode, by a qualified
radio technician.
Note:
You will hear a brief, low-pitched, warning tone four
seconds before the transmission times out.
Procedure:
1
Hold down the PTT button longer than the preprogrammed
time. You hear a short, low-pitched warning tone, the
transmission is cut-off, and the LED goes out until you
release the PTT button.
2
Release the PTT button. The timer resets.
3
Press the PTT button to re-transmit. The time-out timer
restarts and the LED lights up solid red.


Setting the Time and Date

You can set the time and date for your radio.
Settings:
The default time setting is a 12-hour clock.The display shows
12:00AM.
The AM/PM selection is not available for the 24-hour clock
setting.
The default setting for the domestic date shows MDY.
Note:
Check with your dealer or system administrator for
additional programmable settings for this feature.


Editing the Time and Date

Procedure:
<
>
1
to Clck.
or
2
Press the Menu Select button directly below Clck. The
display shows the current setting of the radio.
3
Press the Menu Select button directly below Edit. The first
item blinks.
U
D
4
or
to change the selected item.
OR
<
>
or
one or more times to move to an item you wish to
change.
U
D
or
to change the selected item.
101
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 6000liAstro apx 6000xe series

Table of Contents