Understanding Auto Eq Error; Messages - Pioneer AVH-X5550BT Owner's Manual

Appendix
Additional information
Message Cause Action (Refer-
ence page)
Error-02-9X/- Communication Perform one of
DX failed. the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB portable
audio player/USB
memory.
–Change to a dif-
ferent source.
Then, return to
the USB portable
audio player/USB
memory.
This DivX The inserted ex- Select a file that
rental has ternal storage can be played.
expired. device contains
expired DivX
VOD content.
Video resolu- The inserted ex- Select a file that
tion not sup-
ternal storage can be played.
ported
device contains
a high definition
DivX/MPEG-1/
MPEG-2/
MPEG-4 file.
It is not pos- This unit's flash Select a file that
sible to write memory used can be played.
it in the as the tempo-
flash. rary storage
area is full.
48
En
Message Cause Action (Refer-
ence page)
Your device This unit's DivX Register this unit
is not au- registration to the DivX VOD
thorized to
code has not contents provider.
play this
been authorized
DivX pro- by the DivX
tected video. VOD contents
provider.
Format Read Sometimes Wait until the
there is a delay message disap-
between the pears and you
start of playback hear sound.
and when you
start to hear any
sound.
Video frame DivX file's frame Select a file that
rate not sup- rate is more can be played.
ported than 30 fps.
Audio For- This type of file Select a file that
mat not sup- is not supported can be played.
ported on this unit.
Creating the
The mode was Create the data-
Database
switched to base again. (Page
has failed. video or JPEG 19)
image display
while the data-
base was being
created.
iPod
Message Cause Action
Format Read Sometimes
Wait until the
there is a delay message disap-
between the pears and you
start of playback hear sound.
and when you
start to hear any
sound.
Additional information
Message Cause Action
Error-02-6X/- Communication Disconnect the
9X/-DX failed. cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
iPod failure. Disconnect the
cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
Error-02-67 The iPod firm- Update the iPod
ware version is version.
old.
Stop There are no Transfer songs to
songs. the iPod.
There are no Select a list that
songs in the contains songs.
current list.
Not Found No related Transfer songs to
songs. the iPod.
Bluetooth
Message Cause Action
Error-10 The power failed Turn the ignition
for the switch OFF and
Bluetooth mod- then to ACC or
ule of this unit. ON.
If the error mes-
sage is still dis-
played after
performing the
above action,
please contact
your dealer or an
authorized
Pioneer Service
Station.

Understanding auto EQ error

messages

When correct measurement of the car's interior
acoustic characteristics is not possible using
auto EQ, an error message may appear on the
display. In such cases, refer to the table below to
see what the problem is and how it may be cor-
rected. After checking, try again.
Message Cause Action
Please con- The microphone Plug the optional
nect the mi- is not con- microphone se-
crophone for nected. curely into the
measure- jack.
ment. When
finished,
please push
HOME key.