Table of Contents
Advertisement
ENGLISH
Personalize the Cycling Computer Display
In time mode, select OK >
Personalize your cycling computer display to show information you want to see during training. Adjust the
displays also by using the Polar ProTrainer 5 software. An exercise attached to the training program has its
own display settings that cannot be modified. The information on the display depends on the features that
are activated. For example, if speed measurement is not activated, speed information can not be shown in
the display.
For further information on display symbols, see Symbols on the Display (page 15).
Select the display you want to change by pressing UP or DOWN, and press OK. Set the information for the
blinking upper row with UP or DOWN, and press OK. The information on the display depends on the
features that are activated. For further information, see Feature Settings (page 27).
Repeat the same for the middle and lowest rows. Each display is named after the information shown on
the lower row. To return the default settings of the display, press and hold LIGHT when the rows are
blinking.
Activate
to view the name of the display while changing displays during exercise: In time mode,
Titles
select OK >
Settings > Display > Titles
The display settings are separate for each bike (bike 1, 2, 3). If you change the displays for one bike, the changes
do not affect the other bike displays. The display views depend on the features that are activated. For further
information see Feature Settings (page 27) and Bike Settings (page 29).
Shortcut Button (Quick Menu)
Some settings can be changed with a shortcut button in time mode.
Press and hold
LIGHT > Quick menu
•
Keylock
•
Reminders
•
Alarm
•
Time zone
•
Sleep
34
Settings
Settings > Display > Edit
Advertisement
Table of Contents
