Table of Contents
Advertisement
Event
To set an event countdown in the cycling computer
Select
Settings > Watch > Event
: dd=day, mm=month.
Event day
Rename
: To rename the event, select letters with UP or DOWN, and accept with OK.
To modify the event countdown
Select
Settings > Watch > Event
You can view the event countdown, set a new date, rename or delete it.
In time mode, hide or view the event countdown again by pressing and holding UP.
Alarm
Set an alarm on your cycling computer
Select
Settings > Watch > Alarm > Off / Once / Mon-Fri / Daily
You can set the alarm to go off either once (
(
) or you can set if
Daily
Off
minute unless you press STOP. The watch alarm also functions in sleep mode and even if you have turned
the sound off in the
General
To snooze the alarm an extra 10 minutes, press UP or DOWN buttons or OK:
snooze time starts counting. To exit the snooze alarm, press STOP.
If a battery symbol appears in the display, the alarm cannot be activated.
Time
Set time 1 in the cycling computer
Select
Settings > Watch > Time 1 > 24h / 12h
Set time 2 in the cycling computer
Select
Settings > Watch > Time 2
Set the desired time difference between time 1 and time 2 in hours with UP/ DOWN buttons.
Time zone
Switch between time zones
Select
Settings > Watch > Time zone > Time 1 / Time 2
Select a time zone
In time mode, change the time zone by pressing and holding DOWN. Number 2 on the lower right corner
of the display indicates that Time 2 is in use.
Date
To set the date in the cycling computer
Select
Settings > Watch > Date
dd=day, mm=month, yy=year
Change settings easily by using the Polar ProTrainer 5 software. For further information, see software help.
Once
), everyday between Monday and Friday (
. The alarm sounds in all modes except in exercise mode, and will do so for a
settings.
ENGLISH
Mon-Fri
), daily
is displayed and the
Snooze
Settings
33
Advertisement
Table of Contents
