Advertisement
In record, the Program output provides two independent outputs of 1280 x 720p 10-bit 4:2:2
progressive scan video, at 59.94 or 50.00 Hz.
In playback, if PLAYBACK is set to 720p, the Program output provides two independent outputs
of 1280 x 720p 10-bit 4:2:2 progressive scan video, at 59.94 or 50.00 Hz.
If PLAYBACK is set to 1080p, the Program output provides a 1920 x 1080p 10-bit 4:4:4 RGB
progressive scan video signal at 23.98, 24.00, 25.00, or 29.97 Hz.
Note: the Program HD-SDI output provides 4 channels of embedded audio plus timecode.
Note: When in Varispeed, the Program output will be blanked.
Note: RED ONE outputs progressive scan video, it does not support the 1080PsF format.
Preview HD-SDI
A single DIN 1.0/2.3 connector labeled PVW provides a high definition video preview output.
Pin:
Center
Shield/Screen
Note: If PREVIEW type is set to MENUS (DVI) the PVW output is disabled.
In record, the Preview output provides a 1280 x 720p 10-bit 4:2:2 progressive scan video, at
59.94 or 50.00 Hz.
In playback, if PLAYBACK is set to 720p, the Preview output provides a 1280 x 720p 10-bit 4:2:2
progressive scan video, at 59.94 or 50.00 Hz.
If PLAYBACK is set to 1080p, the Preview output provides a 1920 x 1080p 10-bit 4:2:2 progres-
sive scan video signal at 23.98, 24.00, 25.00, or 29.97 Hz.
Note: the Preview HD-SDI output provides 4 channels of embedded audio plus timecode.
Note: The embedded timecode value is equal to the Time Code value of the recorded
frame previewed by the PVW output. i.e. the timecode sequence will be discontinuous.
Note: RED ONE outputs progressive scan video, it does not support the 1080PsF format.
Nov 27 2008
Signal
HD-SDI
SMPTE-292M HD-SDI
GROUND
Camera ground
Preview HD-SDI Output
Copyright RED Digital Cinema
Description
Direction
Out
--
73
Advertisement
