Advertisement
The default mode is FIXED, which uses 2:3 or other appropriate pull down as required to dis-
play images at a fixed frequency of 59.94 Hz (or 50Hz) at all image capture frame rates. This
mode minimizes display flicker, but will exhibit a 2:3 motion stutter on 24fps images.
The alternative mode is SYNCED. This avoids 2:3 pull down, and instead doubles the capture
frame rate – for example displaying 24fps images at 48Hz (50Hz for 25.00 fps). The display
may exhibit luminance flicker due to the lower frame update rate, but it will not stutter.
Note: When in SYNCED mode - EVF display may blank for up to 3 seconds
- when existing OPEN GATE mode
- after exiting MAGNIFY mode when in 4K record resolution
- after changing between certain Varispeed frame rates
Setup
This menu permits a variety of system maintenance tasks to be accomplished.
Selections are PREFERENCES, MAINTENANCE, SET CLOCK, WRITE LOG and REMOTE
Preferences: permits the user to define system preferences.
Selections are USER PROFILE, KEYMAP, GPIO, PLAYBACK, and DISPLAY
USER PROFILE provides controls that affect the User Profile.
Choices are CLEAR, IMPORT and EXPORT
CLEAR – allows a User Profile to be cleared from memory.
IMPORT – allows a User Profile to be read from the SD card.
EXPORT - the current USER PROFILE parameters are stored to the SD Card. The camera
generates a file name of the format PROFLE_**.RPF
You may edit USER PROFILE filenames on a computer, but do not change its extension
(.RPF) or the camera will not recognize it. Restrict file names to 12 characters.
Nov 27 2008
Copyright RED Digital Cinema
51
Advertisement
