Advertisement
If only one of either a RED-EVF or RED-LCD are present, the HD-SDI and HDMI outputs will
support Surround View, frame guides and safe action / title overlays, waveforms overlaid on a
1280 x 720 pixel video signal. Both of theses outputs include up to 4 channels of 24-bit 48KHz
audio. The HDMI output is compatible with HDMI equipped 720p and 1080p HDTV monitors.
As a user choice, the HDMI (but not the three HD-SDI outputs) can support a 1280 x 848 pixel
output with Surround View, frame guides and safe action / title overlays, waveforms, and cam-
era status and operation menus. This signal is compatible with most DVI equipped SXGA com-
puter monitors, but is not compatible with HDMI equipped 720p or 1080p HDTV displays.
If both a RED-EVF and RED-LCD are present, the HD-SDI and HDMI outputs will be forced to
1280 x 720 (with Surround View) irrespective of the Preview Output parameter setting.
Note: The video format of the HD-SDI Preview output will also be affected by the HD-SDI
refresh rate and PLAYBACK resolution selections described elsewhere in this guide.
To select between 720p and 848p output options, select VIDEO (720p) or MENUS (DVI). The
default is VIDEO (720p) The Preview output setting will be held in camera memory.
Test Signal
Permits the video monitor outputs to be replaced with a video test pattern.
To enable/disable a test signal check the box.
Available test signals include: SMPTE Bars, Black Field, White Field, Luma Ramp, Chroma
Ramp, Chip Chart and Focus Pattern. The RED ONE test signals are not recordable, they are
provided to help align external video monitors connected via the HD-SDI or HDMI outputs.
Nov 27 2008
Copyright RED Digital Cinema
49
Advertisement
