Advertisement
A software update is available for your system
Would you like to upgrade?
Upgrade
Later
Press the joystick to confirm the upgrade, and all monitor outputs will report back –
Performing System Upgrade
This may take several minutes
Do not power-down during this process
A blue highlight bar will animate on all monitor outputs to indicate an upgrade is in progress.
After about 5 minutes, the upgrade will have completed. All monitor outputs will report back
Upgrade Compete
Power-cycle the camera to continue
Power cycle the camera to return to normal operation. During the camera power up process,
the camera will display the camera P.I.N and the firmware Build and Version number.
Nov 27 2008
Copyright RED Digital Cinema
61
Advertisement
