Connecting To Pc - Samsung SP-H700 Owner's Instructions Manual

Connecting to PC

You can connect a PC to the projector and use it as a monitor.
Using PC Video Cable or DVI Cable
DVI-D Video
Cable
Connect PC (RGB In) port on the rear side of the projector to the monitor output port
of PC using PC video cable.
1
If PC has a DVI output port, connect it to DVI port of the projector.
This product supports Plug & Play. No driver installation is needed for Windows XP.
NOTE
Viewing the PC Screen
1
Turn on the projector and press the PC button
to select PC. If the projector is connected to
PC
DVI, press the DVI button to select DVI.
1
If PC Mode is not available, check PC video cable is
in place.
Turn on the PC and set the PC Environment
2
when necessary. (Page 59)
3 Adjust the screen. (Pages 62~65)
Enjoy better picture quality by using DVI-D cable (supports digital signals only)
instead of PC Video cable.
NOTE
DVI-I cable (supports analog signals) is not supported. Use DVD-D cable.
Sound comes out from PC speakers.
60
Rear side of Projector
Rear Connection
PC Video
Cable
or
DVI-D Port
PC
Pin Configuration of PC Video Port Plug
PC Video Cable DVI-D
(15-pin signal) (supports only digital signals)
Pin No. PC Input Pin No.
1 Red (R) 1 T.M.D.S. DATA2-
2 Green (G) 2 T.M.D.S. DATA2+
3 Blue (B) 3 T.M.D.S. DATA2/4 Shield
4 Ground 4 T.M.D.S. DATA4-
5 Ground (DDC) 5 T.M.D.S. DATA4+
6 Red (R) Ground 6 Clock (DDC)
7 Green (G) Ground 7 Data (DDC)
8 Blue (B) Ground 8 No Connection
9 Reserved 9 T.M.D.S. DATA1-
10 Ground Sync 10 T.M.D.S. DATA1+
11 Ground 11 T.M.D.S. DATA1/3 Shield
12 Data (DDC) 12 T.M.D.S. DATA3-
13 Horizontal Sync
14 Vertical Sync
15 Clock (DDC)
VESA Plug & Play
This appliance supports VESA Plug & Play and
recognizes connection to PC automatically.
Signal Pin No. Signal
13 T.M.D.S. DATA3+
14 +5V Power
15 Ground for 5V
16 Hot Plug Detect
17 T.M.D.S. DATA0-
18 T.M.D.S. DATA0+
19 T.M.D.S. DATA0/5 Shield
20 T.M.D.S. DATA5-
21 T.M.D.S. DATA5+
22 T.M.D.S. Clock Shield
23 T.M.D.S. Clock+
24 T.M.D.S. Clock-
DVI-D cable does not support
analog RGB signals.
CAUTION
61