Engaging The Rotor Blades; Disengaging The Rotor Blades; Stopping The Engine; Adjusting The Discharge Chute And Chute Deflector - Toro Power Clear 621 QZR Operator's Manual

Engaging the Rotor Blades

To engage the rotor blades, hold the control bar against the
handle (Figure 19).
1. Control bar
Figure 19

Disengaging the Rotor Blades

To disengage the rotor blades, release the control bar (Figure
20).

Stopping the Engine

To stop the engine, turn the ignition key counterclockwise to
the Off position (Figure 21).
Adjusting the Discharge Chute
and Chute Deflector
To adjust the discharge chute, press the trigger of the Quick
Shoot™ control on the right hand side of the handle and
move it up or down along the handle. Moving the control
down the handle rotates the discharge chute to the left;
11
Figure 20
Figure 21