Leveling The Washer - Labconco SteamScrubber 44003 Series User Manual

Chapter 3: Getting Started

Leveling the Washer

If you have a Freestanding model of the SteamScrubber or FlaskScrubber
Glassware Washer, after you have installed the leveling feet, level the washer by
adjusting the leveling feet.
1. Position the washer in its final installed location.
2. Place a carpenter level on the washer in the positions shown.
3. Turn the four leveling feet, as needed, to level the washer.
10
Product Service 1-800-522-7658